TURBOCHARGER (w/o DPF) INSPECTION

INSPECT TURBOCHARGER MOTOR

A01KGAQE03

Text in Illustration
*1	Ohmmeter

Check the resistance.

Using an ohmmeter, measure the resistance between the terminals.

Standard resistance

Tester Connection	Specified Condition
1 (M-) - 2 (M+)	1 to 100 Ω at 20°C (68°F)

If the result is not as specified, replace the turbocharger.

VISUALLY CHECK TURBOCHARGER SUB-ASSEMBLY
1. Check for deformation and cracks in the turbine wheel on the exhaust side.
  
  Text in Illustration
  
  ^*1
  Turbine Wheel
  
  If the turbine wheel is cracked or deformed, replace the turbocharger sub-assembly.
INSPECT AXIAL PLAY OF TURBINE SHAFT
1. Set the needle of a dial indicator to the exhaust side of the turbine shaft.
2. Move the turbine shaft in the axial direction and measure the axial play of the turbine shaft using the dial indicator.
  
  Note
  
  Turbocharger sub-assembly and dial indicators are surely fixed when performing measurement.
  
  Maximum axial play
  
  0.11 mm (0.0043 in.)
  
  If the axial play is greater than the maximum, replace the turbocharger sub-assembly.
INSPECT RADIAL PLAY OF TURBINE SHAFT
1. Insert the needle of a dial indicator into the oil outlet hole, and set it to the center of the turbine shaft.
2. Move the turbine shaft in the radial direction and measure the radial play of the turbine shaft using the dial indicator.
  
  Maximum radial play
  
  0.112 mm (0.0044 in.)
  
  If the radial play is greater than the maximum, replace the turbocharger sub-assembly.
CHECK TURBINE SHAFT ROTATION
1. Rotate the turbine wheel on the exhaust side with your finger and check that it rotates smoothly.
  
  Tech Tips
  
  Even if it takes effort a little to rotate the turbine wheel, this is not a problem.
  
  If the turbine wheel does not rotate smoothly, replace the turbocharger sub-assembly.