FUEL FILTER INSPECTION


  1. INSPECT FUEL HEATER ASSEMBLY

    A01KGQG

    1. Check the resistance


      1. Connect SST to terminal 2 of the connector and body ground.

      2. Using a vacuum pump, apply vacuum of 27 to 40 kPa to the vacuum switch and then check the resistance.

  2. INSPECT LEVEL WARNING SWITCH

    A01KENVE01

    1. Check the continuity


      1. Using SST, check the continuity between terminals.

        Standard
        Upper end of the float: Continuity
        Lower end of the float: No continuity