FUEL SUPPLY PUMP (w/ DPF) INSPECTION


  1. INSPECT FUEL SUPPLY PUMP ASSEMBLY


    1. A01KH8LE09
      Text in Illustration
      *1 Suction Control Valve

      Inspect the suction control valve.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 20°C (68°F) 1.9 to 2.3 Ω

        If the result is not as specified, replace the fuel supply pump assembly.

    2. A01KEHSE04
      Text in Illustration
      *1 Fuel Temperature Sensor

      Inspect the fuel temperature sensor.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 20°C (68°F) 2.32 to 2.59 kΩ

        If the result is not as specified, replace the fuel supply pump assembly.