CAMSHAFT (w/o DPF) REMOVAL


  1. REMOVE TIMING BELT

    Refer to the procedures up to "REMOVE TIMING BELT" Click here.

  2. REMOVE INJECTOR ASSEMBLY

    Refer to the procedures up to "REMOVE INJECTOR ASSEMBLY" Click here.

  3. REMOVE CAMSHAFT TIMING PULLEY

    A01KGL6

    1. Remove the bolt from the camshaft timing pulley while holding the camshaft with a wrench.

    2. A01KIA4E06
      Text in Illustration
      *a Hold
      *b Turn

      Using SST, remove the camshaft timing pulley and set key.

      SST
      09950-40011   ( 09951-04010, 09952-04010, 09953-04020, 09954-04010, 09955-04071, 09957-04010, 09958-04011 )
    3. A01KGB9E02

      Rotate the crankshaft approximately 90° counterclockwise from the TDC position to lower the piston.

  4. REMOVE NO. 2 TIMING BELT COVER

    A01KGVI

    1. Remove the nut, 4 bolts and timing belt No. 2 cover.

  5. REMOVE NO. 2 CAMSHAFT

    A01KICNE04

    1. Face the key groove of the camshaft upward by turning the camshaft with a wrench.

      Text in Illustration
      *1 Key Groove
      *a Upward
    2. A01KI8RE01

      Uniformly loosen the 15 bearing cap bolts in several steps in the sequence shown in the illustration.

    3. Remove the 5 bearing caps.

    4. A01KF8Y

      Remove the No. 2 camshaft.

  6. REMOVE CAMSHAFT

    A01KI9C

    1. Remove the camshaft.

  7. REMOVE CAMSHAFT SETTING OIL SEAL

    A01KESS

    1. Remove the oil seal from the camshaft.