INTAKE AIR TEMPERATURE SENSOR (w/o DPF) REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE ENGINE SIDE COVER SUB-ASSEMBLY LH


    1. for Single Cab:

      Remove the 4 bolts and remove the engine side cover sub-assembly LH.

    2. for Double Cab:

      Remove the 3 bolts and remove the engine side cover sub-assembly LH.

  3. REMOVE INTAKE AIR TEMPERATURE SENSOR

    A01KG4O

    1. Disconnect the intake air temperature sensor connector.

    2. Using a 22 mm deep socket wrench, remove the intake air temperature sensor.