CRANKSHAFT POSITION SENSOR (w/o DPF) REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE ENGINE SIDE COVER SUB-ASSEMBLY LH (for Double Cab)


    1. Remove the 3 bolts and remove the engine side cover sub-assembly LH.

  3. REMOVE CRANKSHAFT POSITION SENSOR

    A01KEX7

    1. Disconnect the crankshaft position sensor connector.

    2. Detach the 3 wire harness clamps.

    3. Remove the bolt and remove the crankshaft position sensor.