CAMSHAFT POSITION SENSOR INSTALLATION


  1. INSTALL CAMSHAFT POSITION SENSOR


    1. A01KHUYE02
      Text in Illustration
      *1 O-ring

      Apply a light coat of engine oil to the O-ring on the camshaft position sensor.

    2. A01KFV3

      Install the camshaft position sensor with the bolt.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

      Note

      Make sure that the O-ring is not cracked or jammed when installing the camshaft position sensor.

    3. Connect the camshaft position sensor connector.

  2. CONNECT NO. 3 AIR HOSE


    1. A01KFZS

      Connect the No. 3 air hose and secure the hose clamps as shown in the illustration.

  3. INSTALL ENGINE SERVICE HOLE SUB COVER SUB-ASSEMBLY (for Double Cab)

    A01KEH0

    1. Install the engine service hole sub cover with the 7 bolts.

      Torque:
      12 N*m  { 120 kgf*cm, 9 ft.*lbf }

  4. INSTALL PARKING BRAKE LEVER ASSEMBLY (for Double Cab)

    A01KH1U

    1. Install the parking brake lever with the 4 bolts.

      Torque:
      17 N*m  { 175 kgf*cm, 13 ft.*lbf }

    2. Connect the connector.

  5. INSTALL TRANSMISSION FLOOR SHIFT ASSEMBLY (for Double Cab)

    A01KGMH

    1. Install the transmission floor shift with the 4 bolts.

      Torque:
      18 N*m  { 185 kgf*cm, 13 ft.*lbf }

  6. INSTALL FLOOR SHIFT CABLE TRANSMISSION CONTROL SHIFT (for Double Cab)


    1. A01KEIB

      Install the floor shift cable transmission control shift with the nut and washer.

      Torque:
      12 N*m  { 120 kgf*cm, 9 ft.*lbf }

    2. Install a new clip.

  7. INSTALL FLOOR SHIFT CABLE TRANSMISSION CONTROL SELECT (for Double Cab)


    1. A01KHBQ

      Install the floor shift cable transmission control select with clip and washer.

    2. Install a new clip.

  8. INSTALL NO. 1 FRONT FLOOR MAT REAR (for Double Cab)

  9. INSTALL FRONT FLOOR PANEL BRACE (for Double Cab)

    A01KFZF

    1. Install the front floor panel brace with the 3 clips.

  10. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Double Cab)

  11. INSTALL PARKING BRAKE HOLE COVER (for Double Cab)

    A01KHZT

    1. Install the parking brake hole cover with the screw.

  12. INSTALL FRONT DOOR SCUFF PLATE LH (for Double Cab)

    A01KG08

    1. Install the front door scuff plate LH with the 4 screws.

  13. INSTALL FRONT SEAT ASSEMBLY LH (for Double Cab)


    1. Install the front seat LH with the 4 bolts.

      Torque:
      39 N*m  { 400 kgf*cm, 29 ft.*lbf }

    2. Connect the connector.

  14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Torque:
    6.4 N*m  { 65 kgf*cm, 56 in.*lbf }

  15. INSPECT FOR OIL LEAK