DIESEL THROTTLE BODY (w/o DPF) REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE FRONT SEAT ASSEMBLY LH (for Double Cab)


    1. Disconnect the connector.

    2. Remove the 4 bolts and front seat LH.

  3. REMOVE FRONT DOOR SCUFF PLATE LH (for Double Cab)

    A01KG08

    1. Remove the 4 screws and front door scuff plate LH.

  4. REMOVE PARKING BRAKE HOLE COVER (for Double Cab)

    A01KHZT

    1. Remove the screw and parking brake hole cover.

  5. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Double Cab)

  6. REMOVE FRONT FLOOR PANEL BRACE (for Double Cab)

    A01KFZF

    1. Remove the 3 clips, then remove the floor panel brace with the shifting hole cover.

  7. REMOVE NO. 1 FRONT FLOOR MAT REAR (for Double Cab)

  8. SEPARATE FLOOR SHIFT CABLE TRANSMISSION CONTROL SELECT (for Double Cab)


    1. A01KF9M

      Remove the clip.

    2. Remove the clip and washer, and separate the floor shift cable transmission control select.

  9. SEPARATE FLOOR SHIFT CABLE TRANSMISSION CONTROL SHIFT (for Double Cab)


    1. A01KECI

      Remove the clip.

    2. Remove the nut and washer, and separate the floor shift cable transmission control shift.

  10. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY (for Double Cab)

    A01KGMH

    1. Remove the 4 bolts and transmission floor shift.

  11. SEPARATE PARKING BRAKE LEVER ASSEMBLY (for Double Cab)

    A01KH1U

    1. Disconnect the connector.

    2. Remove the 4 bolts, and separate the parking brake lever with parking brake cable.

  12. REMOVE ENGINE SERVICE HOLE SUB COVER SUB-ASSEMBLY (for Double Cab)

    A01KEH0

    1. Remove the 7 bolts and engine service hole sub cover.

  13. DISCONNECT NO. 3 AIR HOSE


    1. A01KEE8

      Loosen the hose clamps as shown in the illustration and disconnect the No. 3 air hose.

  14. REMOVE DIESEL THROTTLE BODY


    1. A01KGJM

      Disconnect the 2 connectors.

    2. Remove the 2 nuts and 2 bolts and remove the diesel throttle body and gasket.