| DTC Code | DTC Name |
|---|---|
| P0069 | MAP Sensor Too High or Too Low |
DESCRIPTION
To detect atmospheric pressure, the atmospheric pressure sensor built into the ECM is used in the common rail system. Following the changes in the atmospheric pressure, the ECM corrects the fuel injection volume, timing and duration, and adjusts the common rail internal fuel pressure for optimizing combustion.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| P0069 | Atmospheric pressure sensor malfunction (2 trip detection logic) |
ECM |
INSPECTION PROCEDURE
Note
After replacing the ECM, the new ECM needs registration Click here and initialization Click here.
PROCEDURE
CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0069)
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON and turn the tester on.
Select the following menus: Powertrain / Engine and ECT / DTC.
Read DTCs.
| Display (DTC Output) | Proceed to |
|---|---|
| P0069 and other DTCs | A |
| P0069 | B |
Tech Tips
If codes other than P0069 are output, perform troubleshooting for those DTCs first.
| B |
|
REPLACE ECM Click here |
| A |
|
GO TO DTC CHART Click here