| Fluid level rise | Maximum | 5 mm (0.20 in.) |
| Fluid pressure at idle speed with valve closed (5L) | Minimum | 8300 - 8800 kPa (85 - 90 kgf/cm2, 1209 - 1821 psi) |
| Fluid pressure at idle speed with valve closed (2KD-FTV) | Minimum | 8826 kPa (90 kgf/cm2, 1280 psi) |
| Steering effort at idle speed | Reference | 6 N*m (60 kgf*cm, 53 in.*lbf) or less |
| Vane pump rotating torque (5L) | 0.27 N*m (2.8 kgf*cm, 2.4 in.*lbf) or less | |
| Vane pump shaft and vane pump housing oil clearance (5L) | Standard | 0.03 - 0.05 mm (0.0012 - 0.0020 in.) |
| Maximum | 0.07 mm (0.0028 in.) | |
| Vane plate height (5L) | Minimum | 8.6 - 8.8 mm (0.339 - 0.346 in.) |
| Vane plate thickness (5L) | Minimum | 1.397 - 1.403 mm (0.0550 - 0.0552 in.) |
| Vane plate length (5L) | Minimum | 14.991 - 15.001 mm (0.5902 - 0.5906 in.) |
| Clearance between the rotor groove and plate (5L) | Maximum | 0.03 mm (0.0012 in.) |
| Spring free length (5L) | Minimum | 32.3 mm (1.272 in.) |
| Drive belt tension (Independent Front Suspension) (5L) | New Belt | 6 - 8 mm (0.24 - 0.32 in.) |
| Used Belt | 8 - 12 mm (0.32 - 0.47 in.) | |
| Drive belt tension (Rigid Front Suspension) (5L) | New Belt | 8 - 10 mm (0.32 - 0.40 in.) |
| Used Belt | 10 - 14 mm (0.40 - 0.55 in.) | |
| Drive belt tension (Independent Front Suspension) (5L) | New Belt | 6 - 8 mm (0.24 - 0.32 in.) |
| Used Belt | 8 - 12 mm (0.32 - 0.47 in.) | |
| Drive belt tension (Rigid Front Suspension) (5L) | New Belt | 8 - 10 mm (0.32 - 0.40 in.) |
| Used Belt | 10 - 14 mm (0.40 - 0.55 in.) | |
| Vane pump rotating torque (2KD-FTV) | 0.27 N*m (2.8 kgf*cm, 2.4 in.*lbf) or less | |
| Vane pump shaft and vane pump housing seal clearance (2KD-FTV) | Standard | 0.03 - 0.05 mm (0.0012 - 0.0020 in.) |
| Maximum | 0.07 mm (0.0028 in.) | |
| Vane plate height (2KD-FTV) | Minimum | 8.6 - 8.8 mm (0.339 - 0.346 in.) |
| Vane plate thickness (2KD-FTV) | Minimum | 1.397 - 1.403 mm (0.0550 - 0.0552 in.) |
| Vane plate length (2KD-FTV) | Minimum | 14.991 - 15.001 mm (0.5902 - 0.5906 in.) |
| Vane plate and vane rotor groove clearance (2KD-FTV) | Maximum | 0.03 mm (0.0012 in.) |
| Spring free length (2KD-FTV) | Minimum | 36.9 mm (1.453 in.) |
| Vane pump housing oil seal drive in depth (2KD-FTV) | 3.4 mm (0.134 in.) | |
| Bevel gear preload (INDEPENDENT FRONT SUSPENSION) | Turning | 0.15 - 0.39 N*m (1.5 - 4.0 kgf*cm, 1.30 - 3.47 in.*lbf) |
| Tie rod end turning torque (INDEPENDENT FRONT SUSPENSION) | 0.29 - 2.45 N*m (2.9 - 24.9 kgf*cm, 2.57 - 21.7 in.*lbf) | |
| Steering rack runout (INDEPENDENT FRONT SUSPENSION) | Maximum | 0.15 mm (0.006 in.) |
| Total preload (INDEPENDENT FRONT SUSPENSION) | Turning | 0.8 - 1.2 N*m (8.1 - 12.2 kgf*cm, 7.1 - 10.6 in.*lbf) |
| Total preload (RIGID FRONT SUSPENSION) | Turning | 0.49 - 0.93 N*m (5 - 9.5 kgf*cm, 4.3 - 8.2 in.*lbf) |
| Steering drag link turning torque (RIGID FRONT SUSPENSION) | 4 - 8 N*m (41 - 82 kgf*cm, 35 - 71 in.*lbf) | |
| Tie rod end turning torque (RIGID FRONT SUSPENSION) | 4 - 8 N*m (41 - 82 kgf*cm, 35 - 71 in.*lbf) | |