| Fuel filter assembly x Body |
18 |
183 |
13 |
| Nozzle holder and nozzle set x Cylinder head |
64 |
650 |
47 |
| Nozzle leakage pipe assembly x Nozzle holder and nozzle holder set |
29.5 |
300 |
22 |
| Injection pipe set x Nozzle holder and nozzle holder set |
24.5 |
250 |
18 |
| Clamp x Injection pipe set |
5.0 |
50 |
44 in.*lbf |
| Accelerator link assembly No. 2 x Intake manifold |
19 |
195 |
14 |
| Intake air connector x Intake manifold |
12 |
120 |
8.8 |
| Injection pump assembly x Timing gear case |
20.5 |
210 |
15 |
| Injection pump stay No. 1 x Injection pump assembly |
18 |
185 |
13 |
| Injection pump cover x Injection pump body |
2.95 |
30 |
26 in.*lbf |
| Primer spring x Injection pump body |
8.35 |
85 |
74 in.*lbf |
| Pre-set timer adjust screw x Injection pump body |
14.2 |
145 |
10 |
| Distributive head x Injection pump body |
11.75 |
120 |
9 |
| Distributive head plug x Injection pump body |
68.65 |
700 |
51 |
| High altitude compensator x Bolt |
6.85 |
70 |
61in.*lbf |
| High altitude compensator x Rubber cap |
12.75 |
125 |
9 |
| Governor cover sub-assembly x Injection pump body |
8.35 |
85 |
74 in.*lbf |
| Governor cover sub-assembly x Adjusting lever |
for Bolt |
8.35 |
85 |
74 in.*lbf |
| for Nut |
6.05 |
62 |
54 |
| Fuel cut solenoid x Distributive head |
22.1 |
225 |
16 |
| Lead wire x Fuel cut solenoid |
1.7 |
17.5 |
15 in.*lbf |
| Connector bracket x Distributive head |
20.1 |
205 |
15 |
| Engine speed sensor x Distributive head |
22.1 |
216 |
16 |
| Timing control valve x Distributive head |
8.35 |
85 |
74 in.*lbf |
| Lead wire x Distributive head |
1.7 |
17.5 |
15 in.*lbf |
| Timer cover sub-assembly x Injection pump body |
6.85 |
67 |
58 in.*lbf |
| Idle up sub-assembly x Injection pump body |
8.35 |
85 |
74 in.*lbf |
| Fuel inlet pipe, Fuel return pipe x Injection pump |
26.55 |
260 |
19 |
| Delivery valve holder x Distributive head |
58.85 |
600 |
43 |
| Throttle position sensor x Injection pump body |
8.35 |
85 |
74 in.*lbf |
| Fuel tank vent tube sub-assembly x Fuel tank sub-assembly |
5.0 |
50 |
44 in.*lbf |
| Fuel cut-off valve assembly x Fuel tank sub-assembly |
3.5 |
35 |
30 in.*lbf |
| Fuel sender gauge assembly x Fuel tank sub-assembly |
1.5 |
15 |
13 in.*lbf |
| Fuel tank band x Fuel tank sub-assembly |
13 |
132 |
95 |
| Nozzle holder body x Nozzle holder retaining nut |
46.58 |
475 |
42 |