MYY6S SHIFT LEVER SHAFT HOUSING REASSEMBLY


  1. INSTALL SHIFT LEVER NO. 2 SHAFT OIL SEAL


    1. A01CJ1CE01

      Using SST and a hammer, install a new shift lever No. 2 shaft oil seal.

      SST
      09950-60010   ( 09951-00210, 09951-00310, 09952-06010 )
      09950-70010   ( 09951-07100 )

  2. INSTALL SHIFT LEVER SHAFT OIL SEAL


    1. A01CHYUE01

      Using SST and a hammer, install a new shift lever shaft oil seal.

      SST
      09950-60010   ( 09951-00200, 09951-00280, 09952-06010 )
      09950-70010   ( 09951-07100 )

  3. INSTALL NO. 1 SHIFT OUTER LEVER


    1. A01CIXOE01

      Install the No. 1 shift and select lever spring, 2 spring seats, shift and select lever No. 2 shift and select lever spring, stopper ring and No. 1 shift outer lever.

    2. Install a new stopper ring spring pin and a new shift lever shaft spring pin.

  4. INSTALL SELECT LEVER SHAFT


    1. A01CHOIE01

      Insert the select outer lever and washer into the shift lever shaft housing and install the select lever shaft.

    2. Tap in a new select outer lever shaft lock pin.

  5. INSTALL EXHAUST BRAKE NEUTRAL SWITCH ASSEMBLY


    1. A01CH0UE01

      Install a new detent and spacer to the shift lever shaft housing.

      Note

      A detent is precoated with Loctite. Completely remove any sealing material from the threads on the case and install a new detent assembly.

      Torque:
      28 N*m  { 286 kgf*cm, 21 ft.*lbf }

    2. Install the exhaust brake neutral switch assembly.

      Torque:
      35 N*m  { 350 kgf*cm, 25 ft.*lbf }