INSTALL COUNTER GEAR REAR BEARING
Using SST and a press, install the counter gear rear bearing (inner race).
INSTALL COLLAR 6TH COUNTER
Using SST and a press, install the collar 6th counter and thrust 6th washer.
INSTALL ANTI-LASH PLATE
Install the 3 anti-lash plate pins so that the protruding amount is within the range indicated in the illustration.
Install the 3 anti-lash plate springs in the grooves on the side of the 5th gear so that the springs are positioned on the left of the pins respectively when viewed from the center of the gear.
Place the anti-lash plate so that the anti-lash plate springs are positioned between the bent portions of the anti-lash plate and the anti-lash plate pins. Aligning the holes on the anti-lash plate with the holes on the 5th gear, install the plate using SST.
INSTALL ANTI-LASH SNAP RING
Using an snap ring expander, install the anti-lash snap ring.
Note
If the snap ring is deformed or damaged, replace it with a new one.
Check that the snap ring is securely installed.
INSTALL COUNTER GEAR FRONT BEARING
Using SST and a press, install a new counter gear front bearing (inner race).
INSTALL SNAP RING COUNTERSHAFT
Using a snap ring expander, install the snap ring C/FT.
Select the thickest snap ring C/FT that can be installed from the following 3 types.
Note
If the snap ring is deformed or damaged, replace it with a new one.
Check that the snap ring is securely installed.
| Thickness: mm (in.) | Identification Color |
|---|---|
| 1.9 (0.0748) | Blue |
| 2.1 (0.0827) | Yellow |
| 2.3 (0.0906) | Pink |