MANUAL TRANSMISSION OIL ON-VEHICLE INSPECTION


  1. CHECK TRANSMISSION OIL


    1. A01CH1VE01

      Park the vehicle in a level place.

    2. Remove the transmission filler plug and gasket.

    3. Check that the oil surface is within 5 mm (0.20 in.) below the lowest point of the transmission filler plug opening.

      Oil grade
      API CD, CE, CF, CH-4 or CL-4
      Viscosity
      SAE 10W-30 or 10W-40

      Note


      • Problems may occur when the oil level is too high or too low.

      • After replacing the oil, drive the vehicle and check the oil level again.

    4. Check for oil leaks if the oil level is low.

    5. Install the transmission filler plug and a new gasket.

      Torque:
      39 N*m  { 400 kgf*cm, 29 ft.*lbf }