PROPELLER SHAFT ASSEMBLY REMOVAL


  1. REMOVE PROPELLER SHAFT ASSEMBLY


    1. A01CHA5E01

      Place matchmarks on the propeller shaft flange and differential.

    2. Remove the 4 nuts, 4 bolts and 4 washers, and separate the propeller shaft from the differential carrier.

      Tech Tips


      • Engage the parking brake.

      • If the flange connection is difficult to separate, temporarily install one nut and evenly tap the propeller shaft flange part with a brass bar and hammer.

    3. A01CIYME01

      Place matchmarks on the propeller shaft flange and intermediate shaft.

    4. Remove the 4 nuts and 4 washers.

    5. Slide the slide yoke towards the rear of the vehicle and remove the propeller shaft assembly.

      Tech Tips

      If the flange connection is difficult to separate, temporarily install one nut and evenly tap the propeller shaft flange part with a brass bar and hammer.

  2. REMOVE CENTER PROPELLER SHAFT ASSEMBLY (for 4 Joint Type)


    1. A01CGP2

      Holding the center support bearing cover bolts, remove the 4 nuts and 4 washers.

    2. A01CGMLE01

      Place matchmarks on the propeller shaft center flange and intermediate shaft.

    3. Remove the 4 nuts and 4 washers.

    4. Remove the propeller shaft center.

  3. REMOVE PROPELLER INTERMEDIATE SHAFT ASSEMBLY


    1. A01CGP2

      Holding the center support bearing cover bolts, remove the 4 nuts and 4 washers.

    2. A01CGR5E01

      Place matchmarks on the intermediate shaft flange and parking brake drum.

    3. Remove the 4 nuts and 4 washers.

    4. Remove the intermediate shaft.

      Tech Tips

      If the flange connection is difficult to separate, temporarily install one nut and evenly tap the propeller shaft flange part with a brass bar and hammer.