PROPELLER SHAFT ASSEMBLY INSTALLATION


  1. INSTALL PROPELLER INTERMEDIATE SHAFT ASSEMBLY


    1. A01CGR5E01

      Align the matchmarks on the intermediate shaft flange and parking brake drum.

    2. Install the 4 nuts and 4 washers.

      Torque:
      103 N*m  { 1050 kgf*cm, 76 ft.*lbf }

      Tech Tips

      Engage the parking brake.

    3. A01CGP2

      Secure the bolts and install the intermediate shaft assembly to the body with the 4 nuts and 4 washers.

      Torque:
      52 N*m  { 525 kgf*cm, 38 ft.*lbf }

  2. INSTALL CENTER PROPELLER SHAFT ASSEMBLY (for 4 Joint Type)


    1. A01CGMLE01

      Align the matchmarks on the propeller shaft center flange and the intermediate shaft, and install the 4 washers and 4 nuts.

      Torque:
      75 N*m  { 760 kgf*cm, 55 ft.*lbf }
    2. A01CGP2

      Secure the bolts and install the propeller shaft center to the body with the 4 nuts and 4 washers.

      Torque:
      52 N*m  { 525 kgf*cm, 38 ft.*lbf }

  3. INSTALL PROPELLER SHAFT ASSEMBLY


    1. A01CIYME01

      Align the matchmarks on the propeller shaft flange and intermediate shaft, and temporarily install the 4 washers and 4 nuts.

    2. Tighten the 4 nuts.

      Torque:
      75 N*m  { 760 kgf*cm, 55 ft.*lbf }

      Tech Tips

      Engage the parking brake.

    3. A01CHA5E01

      Align the matchmarks on the propeller shaft flange and differential.

    4. Install the 4 bolts, 4 washers and 4 nuts.

      Torque:
      75 N*m  { 760 kgf*cm, 55 ft.*lbf }

  4. APPLY GREASE


    1. Apply MP grease through the grease fitting of the joint section.

    2. Apply MP grease through the grease fitting of the sleeve yoke.