CLUTCH MASTER CYLINDER REMOVAL


  1. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH


    1. A01CISN

      Remove the 2 clips.

    2. Detach the 3 clips and remove the lower instrument panel finish panel sub-assembly LH.

    3. Disconnect each connector.

  2. DRAIN CLUTCH FLUID

  3. DISCONNECT FLEXIBLE HOSE TO FLEXIBLE HOSE TUBE


    1. A01CHWA

      Using a 12 mm union nut wrench, disconnect the flexible hose to flexible hose tube from the clutch master cylinder assembly.

  4. DISCONNECT CLUTCH RESERVOIR TUBE


    1. A01CIHJ

      Slide the clip and disconnect the clutch reservoir tubes.

  5. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY


    1. A01CHGU

      Remove the 2 nuts and clutch master cylinder assembly.