CLUTCH RELEASE CYLINDER INSTALLATION


  1. INSTALL CLUTCH RELEASE CYLINDER ASSEMBLY


    1. A01CJ8U

      Install the clutch release cylinder with the 2 bolts.

      Torque:
      12 N*m  { 120 kgf*cm, 9 ft.*lbf }
    2. A01CGUQE02

      Using SST, install the clutch hose to the clutch release cylinder (Procedure A).

      SST
      09023-12701
      Torque:
      without SST
      23 N*m  { 235 kgf*cm, 17 ft.*lbf }
      with SST
      21 N*m  { 213 kgf*cm, 15 ft.*lbf }

      Note


      • Use a torque wrench with a fulcrum length of 300 mm (11.81 in.).

      • This torque value is effective when SST is parallel to a torque wrench.

    3. Connect the clutch hose to the bracket with a new clip (Procedure B).

    4. Using SST, connect the clutch tube to the clutch hose (Procedure C).

      SST
      09023-38201
      Torque:
      without SST
      24 N*m  { 245 kgf*cm, 18 ft.*lbf }
      with SST
      22 N*m  { 222 kgf*cm, 16 ft.*lbf }

      Note


      • Use a torque wrench with a fulcrum length of 300 mm (11.81 in.).

      • This torque value is effective when SST is parallel to a torque wrench.

  2. BLEED CLUTCH LINE

    Tech Tips

    See Pub. No. RM1008E, page 42-2.

  3. INSPECT FOR FLUID LEAK

  4. CHECK FLUID LEVEL IN RESERVOIR

    Tech Tips

    See Pub. No. RM1008E, page 42-2.