IGNITION SWITCH ON-VEHICLE INSPECTION


  1. INSPECT IGNITION SWITCH ASSEMBLY


    1. A01CIBTE04
      Text in Illustration
      *1 Component Side

      Check the resistance.


      1. Using an ohmmeter, measure the resistance between the terminals.

        Standard resistance
        Tester Connection Condition Specified Condition
        Between all terminals LOCK 10 kΩ or higher
        I6-4 (ACC) - I6-9 (AM1) ACC Below 1 Ω

        I6-4 (ACC) - I6-9 (AM1) - I6-10 (IG1)

        I6-5 (AM2) - I6-8 (IG2)

        		 ON Below 1 Ω

        I6-3 (ST1) - I6-9 (AM1) - I6-10 (IG1)

        I6-5 (AM2) - I6-8 (IG2)

        		 START Below 1 Ω

        If any of the results is not specified, replace the ignition switch assembly