STARTER REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. SEPARATE CLUTCH FLEXIBLE HOSE BRACKET


    1. A01CHH4

      Remove the bolt and separate the clutch flexible hose bracket.

  3. REMOVE STARTER ASSEMBLY


    1. A01CICI

      Disconnect the 2 wire harness clamps.

    2. Remove the bolt and the wire harness clamp bracket.

    3. Pull off the terminal cap and remove the bolt, and disconnect the starter wire from terminal B.

    4. Pull off the terminal cap and remove the nut, and disconnect the starter wire from terminal C.

    5. A01CGQR

      Remove the nut, bolt and the starter assembly.