OIL PRESSURE SWITCH REMOVAL


  1. TILT UP CAB

    CAUTION:


    • Make sure that the vehicle is on a level surface before tilting the cab up.

    • Make sure that all the doors are closed before tilting the cab up.

    • Make sure that nobody is inside or near the cab when tilting it up.

    • Be sure to have 2 people tilt the cab up when a heavy object such as a roof rack or cargo carrier is installed to the cab.

    • Be sure to remove anything set on top of the cab before tilting it up.

    • Make sure that the cab is securely locked in place after it is tilted up.

    • Make sure that there are no tools, cloths, etc. left in the engine room before tilting the cab back down.

    • Make sure that the cab is securely locked in place after tilting it back down.

  2. DRAIN ENGINE OIL


    1. Remove the oil filler cap.

    2. Remove the oil pan drain plug and gasket, and then drain the engine oil into a container.

    3. Wipe the oil pan and oil pan drain plug.

    4. Install a new gasket and the oil pan drain plug.

      Torque:
      41 N*m  { 418 kgf*cm, 30 ft.*lbf }

  3. REMOVE ENGINE SIDE COVER SUB-ASSEMBLY RH


    1. Remove the 4 bolts and engine side cover sub-assembly RH.

  4. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY


    1. A01CHBM

      Disconnect the engine oil pressure switch connector.

    2. Remove the engine oil pressure switch assembly and gasket.