TILT UP CAB
CAUTION:
Make sure that the vehicle is on a level surface before tilting the cab up.
Make sure that all the doors are closed before tilting the cab up.
Make sure that nobody is inside or near the cab when tilting it up.
Be sure to have 2 people tilt the cab up when a heavy object such as a roof rack or cargo carrier is installed to the cab.
Be sure to remove anything set on top of the cab before tilting it up.
Make sure that the cab is securely locked in place after it is tilted up.
Make sure that there are no tools, cloths, etc. left in the engine room before tilting the cab back down.
Make sure that the cab is securely locked in place after tilting it back down.
DRAIN ENGINE COOLANT
CAUTION:
Do not remove the radiator cap sub-assembly, radiator drain cock plug or engine drain plug while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.
| *1 | Radiator Cap Sub-assembly |
| *2 | Radiator Drain Cock Plug |
| *3 | Engine Drain Plug |
| *4 | Radiator Reservoir Assembly |
Loosen the radiator drain cock plug and engine drain plug.
Remove the radiator cap sub-assembly, and then drain the coolant.
Tech Tips
Collect the coolant in a container and dispose of it according to the local regulations.
Tighten the radiator drain cock plug by hand.
Tighten the engine drain plug.
REMOVE INLET RADIATOR HOSE
Loosen the 2 hose clamps and remove the inlet radiator hose.
REMOVE FAN
Loosen the 4 nuts.
Remove the fan and generator V belt Click here.
Remove the 4 nuts and fan.
REMOVE FAN PULLEY
Remove the fan pulley from the engine water pump assembly.
REMOVE ENGINE WATER PUMP ASSEMBLY
Remove the 8 bolts and engine water pump assembly.