RADIATOR ON-VEHICLE CLEANING


  1. CHECK FIN FOR BLOCKAGE

    A01CJ4V

    1. If the fins are clogged, wash them with water or a steam cleaner, then dry them with compressed air.

      Note


      • If the steam cleaner is too close to the core, there is a possibility of damaging the fins, so keep to the following injection distances.

        Injection Pressure

        kPa (kgf*cm2, psi)

        Injection Distance

        mm (in.)

        2942 to 4903

        (30 to 50, 427 to 711)

        		 300 (11.811)

        4903 to 7845

        (50 to 80, 711 to 1138)

        		 500 (19.685)

      • If the fins are bent, straighten them with a screwdriver or pliers.

      • Do not expose electronic components to water.