EXHAUST GAS TEMPERATURE SENSOR INSTALLATION


  1. INSTALL EXHAUST GAS TEMPERATURE SENSOR


    1. Using a union nut wrench (14 mm), install the exhaust gas temperature sensor onto the center exhaust pipe assembly and tighten the union nut.

      Torque:
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }

      Note

      If the No. 2 exhaust gas temperature sensor is dropped, replace it with a new one.

      Tech Tips


      • Refer to the torque above when not using a union nut wrench. When not using a union nut wrench, calculate the torque in accordance with the lengths of the union nut wrench and torque wrench Click here.

      • Do not damage the exhaust gas temperature sensor.

    2. Connect the exhaust gas temperature sensor connector and clamp.

  2. INSTALL NO. 2 EXHAUST GAS TEMPERATURE SENSOR


    1. Using a union nut wrench (14 mm), install the No. 2 exhaust gas temperature sensor onto the center exhaust pipe assembly and tighten the union nut.

      Torque:
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }

      Note

      If the No. 2 exhaust gas temperature sensor is dropped, replace it with a new one.

      Tech Tips


      • Refer to the torque above when not using a union nut wrench. When not using a union nut wrench, calculate the torque in accordance with the lengths of the union nut wrench and torque wrench Click here.

      • Do not damage the No. 2 exhaust gas temperature sensor.

    2. Connect the No. 2 exhaust gas temperature sensor connector and clamp.