EXHAUST GAS TEMPERATURE SENSOR INSTALLATION


  1. INSTALL EXHAUST GAS TEMPERATURE SENSOR


    1. A01CGV8

      Using a union nut wrench (14 mm), install the exhaust gas temperature sensor onto the center exhaust pipe assembly.

      Torque:
      without union nut wrench
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }
      with union nut wrench
      27 N*m  { 275 kgf*cm, 20 ft.*lbf }

      Tech Tips


      • Refer to the torque above when not using a union nut wrench. When not using a union nut wrench, calculate the torque in accordance with the lengths of union nut wrench and the torque wrench Click here.

      • Do not damage the exhaust gas temperature sensor.

    2. A01CH5TE01

      Connect the exhaust gas temperature sensor connector.

  2. INSTALL NO. 2 EXHAUST GAS TEMPERATURE SENSOR


    1. A01CI8B

      Using a union nut wrench (14 mm), install the No. 2 exhaust gas temperature sensor onto the center exhaust pipe assembly.

      Torque:
      without union nut wrench
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }
      with union nut wrench
      27 N*m  { 275 kgf*cm, 20 ft.*lbf }

      Tech Tips


      • Refer to the torque above when not using a union nut wrench. When not using a union nut wrench, calculate the torque in accordance with the lengths of union nut wrench and the torque wrench Click here.

      • Do not damage the exhaust gas temperature sensor.

    2. A01CIZ9

      Connect the No. 2 exhaust gas temperature sensor connector.