DPF SWITCH INSPECTION


  1. INSPECT DPF SWITCH ASSEMBLY


    1. Inspect the resistance.


      1. A01CGPVE02
        Text in Illustration
        *1 DPF Switch Assembly

        Using an ohmmeter, measure the resistance between the terminals.

        Standard Resistance
        Tester Connection Switch Connection Specified Condition
        6 - 7 Switch OFF 10 kΩ or higher
        6 - 7 Switch ON Below 1 Ω

      2. Check that the illumination comes on.

        Result
        Connector Connection Condition Illumination
        Apply the battery voltage terminal 2 (+) and 3 (-) Always Comes on