FUEL FILTER (for Engine Room Side) REMOVAL


  1. TILT UP CAB

    CAUTION:


    • Make sure that the vehicle is on a level surface before tilting the cab up.

    • Make sure that all the doors are closed before tilting the cab up.

    • Make sure that nobody is inside or near the cab when tilting it up.

    • Be sure to have 2 people tilt the cab up when a heavy object such as a roof rack or cargo carrier is installed to the cab.

    • Be sure to remove anything set on top of the cab before tilting it up.

    • Make sure that the cab is securely locked in place after it is tilted up.

    • Make sure that there are no tools, cloths, etc. left in the engine room before tilting the cab back down.

    • Make sure that the cab is securely locked in place after tilting it back down.

  2. REMOVE NO. 4 FUEL PIPE SUB-ASSEMBLY


    1. A01CHNR

      Remove the 2 union bolts, No. 4 fuel pipe sub-assembly and 4 gaskets.

  3. DISCONNECT FUEL RETURN PIPE SUB-ASSEMBLY


    1. A01CHFA

      Remove the nut and fuel pipe clamp.

    2. Remove the union bolt and gasket.

    3. Disconnect the fuel return pipe sub-assembly.

  4. REMOVE NO. 3 NOZZLE LEAKAGE PIPE SUB-ASSEMBLY


    1. A01CHS8

      Remove the nut and fuel pipe clamp.

    2. Remove the 2 union bolts, No. 3 nozzle leakage pipe sub-assembly and 2 gaskets.

  5. REMOVE DIESEL FUEL FILTER ASSEMBLY


    1. A01CGUOE01
      Text in Illustration
      *1 Fuel Filter Drain Plug
      *2 Bleeder Plug

      After loosening the fuel filter drain plug, loosen the bleeder plug and drain the fuel.

      Note

      Place a container, etc. underneath the fuel filter to prevent fuel from spraying.

    2. A01CI5XE01

      Using SST, remove the diesel fuel filter assembly.

      SST
      09228-78010