FUEL SENDER GAUGE ASSEMBLY INSPECTION


  1. INSPECT FUEL SENDER GAUGE ASSEMBLY


    1. A01CHRXE01
      Text in Illustration
      *a

      Component without harness connected

      (Fuel Sender Gauge Assembly)

      Check that the float moves smoothly between F (upper end) and E (lower end).

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 F (Upper End) 2.4 to 3.6 Ω
      E (Lower End) 107.5 to 112.5 Ω

      If the result is not as specified, replace the fuel sender gauge assembly.