REAR CRANKSHAFT OIL SEAL REMOVAL


  1. REMOVE MANUAL TRANSMISSION ASSEMBLY

  2. REMOVE CLUTCH COVER ASSEMBLY

  3. REMOVE CLUTCH DISC ASSEMBLY

  4. REMOVE FLYWHEEL SUB-ASSEMBLY


    1. A01CHUK

      Uniformly loosen and remove the 6 bolts in the order shown in the illustration.

      Tech Tips

      Insert a screwdriver through the inspection hole of the flywheel housing into the ring gear of the flywheel to keep it from turning together with the crankshaft.

    2. Remove the flywheel sub-assembly.

      Note

      The flywheel is heavy. When removing, be careful not to drop it on your feet.

  5. REMOVE REAR ENGINE OIL SEAL


    1. A01CGP4E02
      Text in Illustration
      *1 Protective Tape
      *a Cut Position

      Using a knife, cut off the lip of the oil seal.

    2. Using a screwdriver with its tip wrapped in protective tape, pry out the oil seal.