FRONT CRANKSHAFT OIL SEAL REMOVAL


  1. REMOVE RADIATOR ASSEMBLY

    Click here

  2. REMOVE NO. 1 V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT (w/ Air Conditioning System)


    1. A01CHHDE01

      Loosen the bolt (A).

    2. Loosen the bolt (B), then remove the No. 1 V (cooler compressor to crankshaft pulley) belt.

  3. REMOVE CRANKSHAFT PULLEY


    1. A01CIN3

      Tech Tips

      Insert a screwdriver through the inspection hole of the flywheel housing into the ring gear of the flywheel to keep it from turning together with the crankshaft.

  4. REMOVE TIMING CHAIN OR BELT COVER OIL SEAL


    1. A01CGS3E04
      Text in Illustration
      *1 Protective Tape
      *2 Shop Rag or Piece of Cloth

      Using a screwdriver with its tip wrapped in protective tape, pry out the oil seal.

      Tech Tips

      Use a shop rag or piece of cloth to prevent damage to the timing gear case.