ENGINE REAR OIL SEAL REMOVAL


  1. REMOVE MANUAL TRANSMISSION ASSEMBLY

  2. REMOVE CLUTCH COVER ASSEMBLY

  3. REMOVE CLUTCH DISC ASSEMBLY

  4. REMOVE FLYWHEEL SUB-ASSEMBLY


    1. A01CHUK

      Uniformly loosen and remove the 6 bolts in the order shown in the illustration.

      Tech Tips

      Insert a screwdriver through the inspection hole of the flywheel housing into the ring gear of the flywheel to keep it from turning together with the crankshaft.

    2. Remove the flywheel.

      Note

      The flywheel is heavy. When removing, be careful not to drop it on your feet.

  5. REMOVE REAR ENGINE OIL SEAL


    1. A01CGP4E01

      Using a knife, cut off the lip of the oil seal.

    2. Using a screwdriver with its tip wrapped in protective tape, pry out the oil seal.