ENGINE FRONT OIL SEAL REMOVAL


  1. REMOVE RADIATOR ASSEMBLY

    Click here

  2. REMOVE CRANKSHAFT PULLEY


    1. A01CIN3

      Using a 46 mm socket wrench, remove the nut, spacer and pulley.

      Tech Tips

      Insert a screwdriver through the inspection hole of the flywheel housing into the ring gear of the flywheel to keep it from turning together with the crankshaft.

  3. REMOVE TIMING CHAIN OR BELT COVER OIL SEAL


    1. A01CGS3E01

      Using a screwdriver with its tip wrapped in protective tape, pry out the oil seal.