DRIVE BELT INSTALLATION


  1. INSTALL FAN & GENERATOR V BELT


    1. Install the belt.

  2. ADJUST FAN & GENERATOR V BELT


    1. A01CI02E01

      Turn bolt C to adjust the tension of the V belt.

    2. Tighten bolts A and B.

      Torque:
      Bolt A
      29 N*m  { 290 kgf*cm, 18 ft.*lbf }
      Bolt B
      55 N*m  { 560 kgf*cm, 38 ft.*lbf }

    3. Tighten bolt C.

      Torque:
      6.0 N*m  { 60 kgf*cm, 53 in.*lbf }

  3. INSPECT DRIVE BELT


    1. A01CHS3E01

      Check the V belt deflection.

      Tech Tips

      The specified deflection values per belt are shown in the following table.

      Deflection
      Item Specified Condition
      New belt 10.5 to 12.5 mm (0.41 to 0.49 in )
      Used belt 12.5 to 16.0 mm (0.49 to 0.63 in )

      Note


      • Check the V belt deflection at the specified point.

      • When inspecting a belt which has been used for over 5 minutes, apply the used belt specifications.