INTAKE AIR TEMPERATURE SENSOR INSTALLATION

INSTALL INTAKE AIR TEMPERATURE SENSOR

1. Install a new gasket to the intake air temperature sensor.

2. Using a 14 mm union nut wrench, install the intake air temperature sensor.

   Torque:

   20 N*m  { 200 kgf*cm, 14 ft.*lbf }

   Note

   Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench Click here.

3. Connect the wire harness clamp bracket with the bolt.

   Torque:

   29 N*m  { 296 kgf*cm, 21 ft.*lbf }

4. Connect the clamp and intake air temperature sensor connector.