MASS AIR FLOW METER REMOVAL


  1. TILT UP CAB

    CAUTION:


    • Make sure that the vehicle is on a level surface before tilting the cab up.

    • Make sure that all the doors are closed before tilting the cab up.

    • Make sure that nobody is inside or near the cab when tilting it up.

    • Be sure to have 2 people tilt the cab up when a heavy object such as a roof rack or cargo carrier is installed to the cab.

    • Be sure to remove anything set on top of the cab before tilting it up.

    • Make sure that the cab is securely locked in place after it is tilted up.

    • Make sure that there are no tools, cloths, etc. left in the engine room before tilting the cab back down.

    • Make sure that the cab is securely locked in place after tilting it back down.

  2. REMOVE MASS AIR FLOW METER SUB-ASSEMBLY


    1. A01CHHR

      Disconnect the mass air flow meter sub-assembly connector.

    2. Remove the 2 screws and mass air flow meter sub-assembly.