ACCELERATOR PEDAL INSTALLATION


  1. INSTALL ACCELERATOR PEDAL ASSEMBLY

    Note

    This accelerator pedal does not require lubrication.

    Do not apply oil or other lubrication to the accelerator pedal assembly.

    If applied, the accelerator pedal assembly must be replaced.


    1. Install the accelerator pedal assembly with the 2 nuts.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

      Note


      • Do not subject the accelerator pedal assembly to physical shocks.

      • Do not disassemble the accelerator pedal assembly.

    2. Connect the accelerator pedal assembly connector.