DIESEL THROTTLE BODY REMOVAL


  1. TILT UP CAB

    CAUTION:


    • Make sure that the vehicle is on a level surface before tilting the cab up.

    • Make sure that all the doors are closed before tilting the cab up.

    • Make sure that nobody is inside or near the cab when tilting it up.

    • Be sure to have 2 people tilt the cab up when a heavy object such as a roof rack or cargo carrier is installed to the cab.

    • Be sure to remove anything set on top of the cab before tilting it up.

    • Make sure that the cab is securely locked in place after it is tilted up.

    • Make sure that there are no tools, cloths, etc. left in the engine room before tilting the cab back down.

    • Make sure that the cab is securely locked in place after tilting it back down.

  2. REMOVE NO. 4 AIR HOSE


    1. A01CHYD

      Loosen the 2 hose clamps and remove the No. 4 air hose from the venturi assembly and No. 1 intake pipe.

  3. REMOVE VENTURI ASSEMBLY


    1. A01CICR

      Disconnect the 2 venturi assembly connectors.

    2. A01CHDI

      Remove the 2 bolts, 2 nuts and venturi assembly.

      Text in Illustration
      A01CHW8 Bolt
      A01CHIJ Nut