CYLINDER HEAD REASSEMBLY


  1. INSTALL VALVE STEM OIL SHIELD

    A01CJ5HE01

    1. Apply a light coat of engine oil to the valve guide bush.

    2. Using SST, install the valve stem oil shield.

      SST
      S0947-22210

      Tech Tips

      After pressing in the oil seal, check that the height of the valve stem oil seal is as illustrated.

  2. INSTALL INTAKE VALVE


    1. Apply engine oil to the valve tip.

    2. A01CJC4E01

      Install the valve, inner compression spring and valve spring retainer.

      Note

      Install the parts to their original locations.

    3. Using SST, compress the inner compression spring and place the 2 valve spring retainer locks around the valve stem.

      SST
      09202-70020   ( 09202-01010, 09202-00020, 09202-01020, 90154-80004 )
    4. A01CIB1

      Using a 5 mm pin punch, lightly tap the valve stem tip to ensure a proper fit.

      Note

      Be careful not to damage the valve stem tip.

  3. INSTALL EXHAUST VALVE


    1. Apply engine oil to the valve tip.

    2. A01CJC4E01

      Install the valve, inner compression spring and valve spring retainer.

      Note

      Install the parts to their original locations.

    3. Using SST, compress the inner compression spring and place the 2 valve spring retainer locks around the valve stem.

      SST
      09202-70020   ( 09202-01010, 09202-00020, 09202-01020, 90154-80004 )
    4. A01CIB1

      Using a 5 mm pin punch, lightly tap the valve stem tip to ensure a proper fit.

      Note

      Be careful not to damage the valve stem tip.