ECM INSTALLATION


  1. INSTALL ECM


    1. A01CJGJ

      Install the ECM cover with the 4 screws.

      Note

      Do not use an ECM that has been dropped or received strong impact.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }
    2. A01CIYG

      Connect the 4 ECM connectors until they are locked.

  2. CONNECT BATTERY NEGATIVE TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REGISTER ID CODE

    Click here

  4. CHECK ID CODE

    Click here

  5. INITIALIZE THE LEARNED VALUE OF THE SUPPLY PUMP ASSEMBLY


    1. Perform initialization procedures Click here.