DIESEL THROTTLE BODY INSTALLATION


  1. INSTALL DIESEL THROTTLE BODY


    1. Remove any seal packing material from the contact surface.

    2. A01CJAVE02
      Text in Illustration
      *1 70 mm (2.75 in.)
      *2 Seal Packing

      Apply a continuous bead of seal packing (width: 1.5 to 2.5 mm (0.0591 to 0.0984 in. )) as shown in the illustration.

      Tech Tips


      • Remove any oil from the contact surface.

      • Install the diesel throttle body assembly within 3 minutes of applying the seal packing.

      • Do not run the engine for at least 2 hours after installing.

    3. A01CH93

      Install the diesel throttle body with the 2 bolts and 2 nuts.

      Torque:
      29 N*m  { 290 kgf*cm, 21 ft.*lbf }
    4. A01CHFJ

      Connect the 2 diesel throttle body connectors.

  2. INSTALL NO. 4 AIR HOSE


    1. A01CJ8A

      Install the No. 4 air hose with 2 new clamps.