ECD SYSTEM, Diagnostic DTC:P0606, P0607

DTC Code DTC Name
P0606 ECM / PCM Processor
P0607 Control Module Performance

DESCRIPTION

DTC No. DTC Detection Condition Trouble Area
P0606 ECM internal error (1 trip detection logic) ECM
P0607 ECM internal error (1 trip detection logic) ECM

INSPECTION PROCEDURE

Note

After replacing the ECM, the new ECM needs registration Click here and initialization Click here.

PROCEDURE


  1. CHECK DTC OUTPUT


    1. Clear the DTCs Click here.

    2. Turn the ignition switch off.

    3. Disconnect the negative battery terminal and wait for 1 minute.

    4. Connect the negative battery terminal.

    5. Turn the ignition switch to ON.

    6. Enter the following menus: Powertrain / Engine and ECT / DTC.

    7. Read the DTCs.

      Result
      Result Proceed to
      DTC P0606 and/or P0607 are output A
      DTC is not output B

    B

    CHECK FOR INTERMITTENT PROBLEMS Click here

    A

    REPLACE ECM Click here