ECD SYSTEM, Diagnostic DTC:P0168

DTC Code DTC Name
P0168 Fuel Temperature Too High

DESCRIPTION

Refer to DTC P0180 Click here.

DTC No. DTC Detection Condition Trouble Area
P0168

After engine is warmed up, conditions (a) and (b) continue for more than 1 second:

(a) Engine speed: 1000 rpm or more

(b) Fuel temperature: 200°C (392°F) or more

 Fuel cooler

INSPECTION PROCEDURE

Tech Tips


  • If the engine is operated under high load when the fuel level is low, this DTC may be stored. If the DTC is stored, first check the fuel level.

  • Read freeze frame data using the intelligent tester. The ECM records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can be helpful in determining whether the vehicle was moving or stationary, whether the engine was warmed up or not, as well as other data recorded at the time of a malfunction.

PROCEDURE


  1. CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0168)


    1. Replace the normal DLC3 cable (12 V specification) for the intelligent tester with the 24 V DLC3 cable.

      Note

      Be sure to use the 24 V DLC3 cable when connecting the intelligent tester to the DLC3. Using the normal DLC3 cable (12 V specification) will cause damage to the tester.

    2. Connect the intelligent tester to the DLC3.

    3. Turn the ignition switch to ON.

    4. Turn the tester on.

    5. Enter the following menus: Powertrain / Engine and ECT / Data List / DTC.

    6. Read the DTCs.

      Result
      Result Proceed to
      DTC P0168 is output A
      DTC P0168 and other DTCs are output B

      Tech Tips

      If any DTCs other than P0168 are output, troubleshoot those DTCs first.


    B

    GO TO DTC CHART Click here

    A

    REPLACE FUEL COOLER Click here