ECD SYSTEM, Diagnostic DTC:P0096

DTC Code DTC Name
P0096 Intake Air Temperature Sensor 2 Circuit Range / Performance

DESCRIPTION

Refer to DTC P0095 Click here.

DTC No. DTC Detection Condition Trouble Area
P0096

When the following conditions (a) and (b) are met:

(2 trip detection logic)

(a) Vehicle is driven at varying engine loads (accelerating and decelerating)

(b) Intake air temperature after turbo charged remains within 2°C (3.6°F) of the engine starting temperature

 Intake air temperature sensor

WIRING DIAGRAM

Refer to DTC P0095 Click here.

INSPECTION PROCEDURE

Tech Tips

Read freeze frame data using the intelligent tester. The ECM records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can be helpful in determining whether the vehicle was moving or stationary, whether the engine was warmed up or not, as well as other data recorded at the time of a malfunction.

PROCEDURE


  1. CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0096)


    1. Replace the normal DLC3 cable (12 V specification) for the intelligent tester with the 24 V DLC3 cable.

      Note

      Be sure to use the 24 V DLC3 cable when connecting the intelligent tester to the DLC3. Using the normal DLC3 cable (12 V specification) will cause damage to the tester.

    2. Connect the intelligent tester to the DLC3.

    3. Turn the ignition switch to ON.

    4. Turn the tester on.

    5. Enter the following menus: Powertrain / Engine and ECT / DTC.

    6. Read the DTCs.

      Result
      Result Proceed to
      DTC P0096 is output A
      DTC P0096 and other DTCs are output B

      Tech Tips

      If any DTCs other than P0096 are output, troubleshoot those DTCs first.


    B

    GO TO DTC CHART Click here

    A

    REPLACE INTAKE AIR TEMPERATURE SENSOR Click here