LIGHTING SERVICE DATA

HEADLIGHT DIMMER SWITCH
Connector Condition Tester Connection Switch Condition Specified Condition
Component without harness connected 13 (T) - 1 (EL) Light control switch off 10 kΩ or higher
9 (H) - 1 (EL)
13 (T) - 1 (EL) Light control switch tail Below 1 Ω
13 (T) - 1 (EL) Light control switch head Below 1 Ω
9 (H) - 1 (EL)
3 (HU) - 4 (ED) Headlight dimmer switch flash Below 1 Ω
4 (ED) - 1 (EL)
2 (HL) - 4 (ED) Headlight dimmer switch low beam Below 1 Ω
3 (HU) - 4 (ED) Headlight dimmer switch hi beam Below 1 Ω
5 (TR) - 7 (E) Turn signal switch right turn Below 1 Ω
5 (TR) - 7 (E) Turn signal switch neutral 10 kΩ or higher
6 (TL) - 7 (E)
6 (TL) - 7 (E) Turn signal switch left turn Below 1 Ω
11 (BFG) - 10 (LFG) Front fog light switch off 10 kΩ or higher
11 (BFG) - 10 (LFG) Front fog light switch on Below 1 Ω
12 (B) - 10 (LFG) Rear fog light switch off 10 kΩ or higher
12 (B) - 10 (LFG) Rear fog light switch on Below 1 Ω
12 (B) - 11 (BFG) Rear fog light switch off 10 kΩ or higher
12 (B) - 11 (BFG) Rear fog light switch on Below 1 Ω
HAZARD WARNING SWITCH
Connector Condition Tester Connection Switch Condition Specified Condition
Component without harness connected 1 (TB) - 5 (OFF) Hazard warning signal switch off Below 1 Ω
1 (TB) - 2 (TL) Hazard warning signal switch on Below 1 Ω
1 (TB) - 4 (TR) Below 1 Ω
ROOM LIGHT SWITCH
Connector Condition Tester Connection Switch Condition Specified Condition
Component without harness connected 4 - 1 Room light switch off 10 kΩ or higher
4 - 1 Room light switch on Below 1 Ω
HEADLIGHT LEVELING SWITCH
Connector Condition Tester Connection Switch Position Specified Condition (Battery voltage is 12 V)
Component with harness connected 1 (B) - 2 (RHM-) 0 0.84 to 1.56 V
(0.5) 1.8 to 2.52 V
1 2.76 to 3.48 V
(1.5) 3.72 to 4.44 V
2 4.68 to 5.4 V
(2.5) 5.64 to 6.36 V
3 6.6 to 7.32 V
(3.5) 7.56 to 8.28 V
4 8.52 to 9.24 V
(4.5) 9.48 to 10.2 V
5 10.44 to 11.16 V
STOP LIGHT SWITCH
Connector Condition Tester Connection Switch Condition Specified Condition
Component without harness connected 1 - 2 Shaft released Below 1 Ω
Shaft pushed 10 kΩ or higher
TURN SIGNAL FLASHER ASSEMBLY
Connector Condition Tester Connection Switch Condition Specified Condition
Front view of wire harness connector 1 (B) - Body ground Always 20 to 28 V
Component with harness connected 5 (ER) - Body ground Turn signal switch (TURN R) OFF → ON 18 V or higher → 0.5 V or or less
Hazard warning switch OFF → ON 18 V or higher → 0.5 V or or less
2 (LR) - Body ground Turn signal switch (TURN R) OFF → ON 1.5 V or or less → 1.5 V or or less ←→ 18 V or higher (60 to 120 times per minute)
Hazard warning switch OFF → ON 1.5 V or or less → 1.5 V or or less ←→ 18 V or higher (60 to 120 times per minute)
6 (EL) - Body ground Turn signal switch (TURN L) OFF → ON 18 V or higher → 0.5 V or or less
Hazard warning switch OFF → ON 18 V or higher → 0.5 V or or less
3 (LL) - Body ground Turn signal switch (TURN L) OFF → ON 1.5 V or or less → 1.5 V or or less ←→ 18 V or higher (60 to 120 times per minute)
Hazard warning switch OFF → ON 1.5 V or or less → 1.5 V or or less ←→ 18 V or higher (60 to 120 times per minute)
HEADLIGHT RELAY
Connector Condition Tester Connection Condition Specified Condition
- 3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
- 3 - 5 Battery voltage applied to terminals 1 and 2 Below 1 Ω
FOG LIGHT RELAY (for Rear)
Connector Condition Tester Connection Condition Specified Condition
- 3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
- 3 - 5 Battery voltage applied to terminals 1 and 2 Below 1 Ω