POWER TAKE-OFF CLUTCH SWITCH INSPECTION


  1. INSPECT POWER TAKE-OFF CLUTCH SWITCH ASSEMBLY


    1. A01CIQPE01
      Text in Illustration
      *a

      Component without harness connected

      (Power Take-off Clutch Switch Assembly)
      *b 4.75 to 6.25 mm (0.19 to 0.25 in.)
      *c On
      *d Off

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - 2 On Below 1 Ω
      1 - 2 Off 10 kΩ or higher

      If the result is not as specified, replace the power take-off clutch switch assembly.