MIRROR HEATER SWITCH INSPECTION


  1. INSPECT MIRROR HEATER SWITCH ASSEMBLY


    1. A01CGR9E02
      Text in Illustration
      *a

      Component without harness connected

      (Mirror Heater Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 (D) - 4 (IG) Switch off 10 kΩ or higher
      1 (D) - 4 (IG) Switch on Below 1 Ω

      If the result is not as specified, replace the mirror heater switch assembly.

    2. A01CGR9E04
      Text in Illustration
      *a

      Component without harness connected

      (Mirror Heater Switch Assembly)

      Check the illumination of the mirror heater switch assembly.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → 4 (IG)

      Battery negative (-) → 11 (E)

      		 Illuminates

      If the result is not as specified, replace the mirror heater switch assembly.