POWER WINDOW REGULATOR MOTOR INSPECTION


  1. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH


    1. Apply 24 V battery voltage to connector terminals 1 and 2.

    2. A01CJ6GE01
      Text in Illustration
      *1 Motor Gear
      *a

      Component without harness connected

      (Power Window Regulator Motor Assembly LH)
      A01CHW8 Clockwise
      A01CHIJ Counterclockwise

      Check that the motor gear rotates smoothly as follows.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → 1

      Battery negative (-) → 2

      		 Motor gear rotates clockwise

      Battery positive (+) → 2

      Battery negative (-) → 1

      		 Motor gear rotates counterclockwise

      If the result is not as specified, replace the power window regulator motor assembly LH.

  2. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH


    1. Apply 24 V battery voltage to connector terminals 1 and 2.

    2. A01CI9SE01
      Text in Illustration
      *1 Motor Gear
      *a

      Component without harness connected

      (Power Window Regulator Motor Assembly RH)
      A01CHW8 Clockwise
      A01CHIJ Counterclockwise

      Check that the motor gear rotates smoothly as follows.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → 2

      Battery negative (-) → 1

      		 Motor gear rotates clockwise

      Battery positive (+) → 1

      Battery negative (-) → 2

      		 Motor gear rotates counterclockwise

      If the result is not as specified, replace the power window regulator motor assembly RH.