FRONT SEAT ASSEMBLY (for Driver Seat with Suspension Type Seat Cushion) REMOVAL


  1. REMOVE SEAT TRACK COVER RH


    1. Operate the seat track handle sub-assembly LH and move the front seat assembly to the rearmost position.

    2. A01CIWJ

      Using moulding remover A, detach the 2 claws and remove the seat track cover RH.

  2. REMOVE FRONT SEAT ASSEMBLY

    A01CJ1R

    1. Remove the 2 bolts on the front side of the seat.

    2. Operate the seat track handle sub-assembly LH and move the front seat assembly to the foremost position.

    3. Remove the 2 bolts on the rear side of the seat.

    4. Disconnect the connector and remove the front seat assembly.

      Note

      Be careful not to damage the vehicle body.