RADIO ANTENNA INSTALLATION


  1. INSTALL ANTENNA ASSEMBLY WITH HOLDER


    1. A01CGVME01
      Text in Illustration
      *1 String

      Tie the string that was passed through the pillar to the antenna assembly with holder.

    2. Using the string, pass the antenna assembly with holder through the pillar and pull the antenna assembly with holder into the vehicle.

    3. A01CHZ1

      Connect the plug to the antenna cord sub-assembly.

    4. Install the antenna assembly with holder with the 2 screws.

      Torque:
      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }

    5. Remove the string from the plug.

  2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH


    1. Connect each connector.

    2. Attach the 3 clips to install the lower instrument panel finish panel sub-assembly LH.

    3. Install the 2 clips.