FRONT DOOR LOCK INSPECTION


  1. INSPECT FRONT DOOR LOCK ACTUATOR ASSEMBLY LH


    1. A01CIQKE02
      Text in Illustration
      *a Lock
      *b Off
      *c Unlock

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      4 (L) - 5 (E) Lock Below 1 Ω
      4 (L) - 5 (E) OFF 10 kΩ or higher
      1 (UL) - 5 (E) OFF 10 kΩ or higher
      1 (UL) - 5 (E) Unlock Below 1 Ω

      If the result is not as specified, replace the front door lock actuator assembly LH.

  2. INSPECT FRONT DOOR LOCK ACTUATOR ASSEMBLY RH (for Front Passenger Side)


    1. A01CIKCE01
      Text in Illustration
      *a Lock
      *b Unlock

      Apply battery voltage to the motor connector and check the operation of the front door lock actuator assembly RH.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → 1 (L)

      Battery negative (-) → 2 (UL)

      		 Lock

      Battery positive (+) → 2 (UL)

      Battery negative (-) → 1 (L)

      		 Unlock

      If the result is not as specified, replace the front door lock actuator assembly RH.